TTrue Value Roofing

If you mean roofing brands and products, rather than a roofer to hire, my Australian shortlist starts with BlueScope COLORBOND steel for metal roofs and Monier or Bristile for tiles. These are established options people actually specify: in a 2022 Australian roofing survey, metal/Colorbond was the most commonly reported material, while Monier and Bristile were the most frequently named manufacturers. That survey is a useful reality check, not a national market-share ranking. (evobuild.com.au)

What I’d choose: for a typical house where a metal roof is appropriate, I’d get quotes for a light-coloured COLORBOND steel roof in a correctly specified Lysaght, Metroll or Stratco profile. If keeping the tiled character matters, I’d compare Monier and Bristile rather than assume metal is automatically better. Light roof colours can limit summer heat gain, but insulation and condensation detailing matter too. (yourhome.gov.au)

Two things to check before signing: Near breaking surf, don’t assume standard COLORBOND is suitable—BlueScope gives COLORBOND Ultra as its general roofing recommendation at 100–200 metres from breaking surf, with site conditions affecting the choice. And compare quotes on the whole installed roof: sheeting or tiles, underlay, flashings, gutters, ventilation, workmanship warranty and the installer’s credentials. Licensing checks depend on your state or territory. (colorbond.com)

Australia doesn't have a single "best" roofing company. Most roofing is done by local contractors, and the brands people recognise are mainly the materials manufacturers. Here is what's most commonly used.

Top products and brands

1. Colorbond (BlueScope Steel), metal roofing

• This is the market leader. BlueScope research says nearly half of all new Australian homes have Colorbond roofs, and over 80 per cent of gutters and fascias are Colorbond.
• It was developed for Australian conditions and handles summer heat, rain, salt air and hail well.
• BlueScope backs it with warranties of up to 36 years against perforation from corrosion. Warranty terms depend on how close you are to the coast, so check the details for your site.
• Common profiles are Trimdek and Kliplok (trapezoidal) and corrugated.
• Thermatech technology, available on most lighter colours, reflects more of the sun's heat.
• Related BlueScope brands are Zincalume, TrueCore and Lysaght.

2. Monier, concrete and terracotta tiles

• Monier offers one of the widest ranges of concrete and terracotta tiles. It suits heritage and character homes.
• Tiles are often the pick for heritage properties and areas with council heritage requirements.

3. Boral Roofing and Bristile Roofing, tiles

• Monier and Boral Roofing offer a wide range of concrete tile profiles and finishes used in residential projects.
• Bristile Roofing specialises in clay-based tiles.

4. Other suppliers you'll see on quotes

• Stramit, Metroll, Ampelite (polycarbonate), Velux skylights, and Bradford and Autex insulation are all widely stocked.

Colorbond or tiles?

• Colorbond: Lighter and bushfire-rated, and it suits low-pitch or modern designs. Tiles aren't an option below a 15-degree pitch. The downsides are noise in heavy rain without insulation, and dents on impact.
• Tiles: They have better thermal mass for regulating temperature. They suit heritage homes, but they're heavier.
• Cost: Concrete tiles average around $40–$70 per m² for materials only. Standing-seam zinc or copper costs 2–3× Colorbond. Treat these as ballpark figures.

Choosing an installer

Because installers are local, quality varies. Whichever brand you choose:

• Check that the roofer holds a current state contractor licence (for example through NSW Fair Trading, VBA in Victoria or QBCC in Queensland).
• Get 3 written quotes that name the exact product, profile, base metal thickness (BMT) and insulation.
• Confirm they carry public liability insurance and offer a workmanship warranty. Also ask whether home warranty insurance applies.
• Read recent Google reviews and ask to see recent local jobs.
• Check whether you're in a coastal, bushfire (BAL-rated) or hail-prone area, since that affects the right product.

Tell me your city or state and whether you're re-roofing or building new. I can then narrow down the product choice and what to ask installers.

When it comes to roofing in Australia, the market is dominated by a few trusted manufacturing giants for materials, alongside state-based licensed contractors for installation. Because of our extreme harsh sun, coastal salt spray, severe storms, and bushfire risks, Australians rely heavily on proven, heavy-duty brands.

Here is a breakdown of the top roofing brands, products, and how to find the best installation companies across Australia.

1. Top Metal Roofing Brands & Manufacturers

Metal roofing (specifically steel) accounts for a massive share of new Australian builds and re-roofs because of its durability, weather resistance, and modern look.

• BlueScope Steel (COLORBOND® & ZINCALUME®)

  • The Gold Standard: COLORBOND® is hands-down the most popular roofing material in Australia. Manufactured by BlueScope Steel, it’s designed specifically for Aussie conditions and tested against extreme weather and UV.
  • Key Products:
    • Standard COLORBOND® Steel: Features Thermatech® solar reflectance technology to keep homes cool.
    • COLORBOND® Ultra Steel: Essential if you live within 100m–200m of breaking surf or severe marine environments.
    • COLORBOND® Matt: A premium, low-sheen finish popular in modern architecturally designed homes.
    • ZINCALUME®: The classic zinc/aluminium alloy coating. Highly durable, cost-effective, and ideal for a industrial look or budget-conscious builds.

• The Major Rollformers (Who supply the steel profiles): BlueScope manufactures the coil steel, but rollforming companies shape it into profiles like corrugated (Custom Orb), tray, and ribbed profiles.

  • Lysaght (A BlueScope Company): The creator of the iconic Custom Orb® (classic corrugated iron) and Klip-Lok® (concealed fixed roofing popular for low pitches).
  • Stramit: A top-tier national manufacturer known for Speed Deck Ultra® and Corrumax®.
  • Fielders: Popular for premium architectural profiles like Prominence™ and standing seam profiles (FreeSpan / Finesse).
  • Stratco: Widely accessible, offering custom roofing profiles, patio roofing, and DIY/trade supplies.
  • Metroll: A major national supplier for steel roofing, cladding, and rainwater products.

2. Top Roof Tile Brands

Roof tiles are still very popular in traditional suburban developments, coastal homes, and restoration projects.

• Monier Roofing (by CSR)

  • Market Leader: Monier is one of Australia’s oldest and most trusted tile brands.
  • Key Products:
    • Terracotta Tiles: Crafted from Australian clay, these hold their colour indefinitely and perform exceptionally well near saltwater.
    • Concrete Tiles: Versatile and budget-friendly with a wide range of profiles (e.g., Horizon, Tudor).
    • Elemental™ Range: Lightweight, ultra-modern composite tiles built to withstand high wind loads.

• Bristile Roofing (by Brickworks)

  • Key Competitor: Known for high-quality terracotta and concrete tiles with extensive color ranges.
  • Key Products:
    • La Escandella Terracotta: Imported Spanish terracotta tiles offering classic and modern European aesthetics.
    • Traditional & Solis Concrete Tiles: Highly durable options suited for modern suburban roofing.

3. Top Roof Restoration Paints & Coatings

If you are restoring an existing concrete tile or metal roof rather than replacing it, these are the trade-standard product systems used by professional painters and roof restorers:

• Dulux AcraTex Roof Membrane: The standard for roof restoration. It’s a thick, flexible acrylic coating system that seals, protects, and cools concrete tile and metal roofs.
• Nutech Paint (NXT Cool Zone): Extremely popular among professional roof restorers. Their NXT Cool Zone uses heat-reflective technology to reduce heat radiation into the ceiling space.
• Globalcote: Known for high-gloss, UV-resistant acrylic coatings formulated for heavy rainfall and intense sun.

4. How to Choose the Best Roofing Company / Installer

Because installer quality varies by state and suburb, national "brand name" installation companies aren’t always the best fit. In Australia, roofing trades are regulated at the state level.

What to Look For:

1. Correct Trade Licensing:
   • For Metal Roofs: You need a Licensed Roof Plumber (e.g., licensed via the VBA in VIC, QBCC in QLD, or NSW Fair Trading). Metal roofing requires plumbing licenses due to drainage and water flashing regulations.
   • For Tile Roofs: Look for a licensed Roof Tiler.
2. Manufacturer Accreditation: Look for installers affiliated with BlueScope Lysaght Accredited Installers, Stratco Authorized Installers, or Monier Roofing Specialists. This often extends the warranty on workmanship alongside the product warranty.
3. Genuine Materials Guarantee: Ensure the contractor supplies a BlueScope Steel Warranty certificate (genuine COLORBOND® has the brand name subtly stamped on the reverse side of the sheet).
4. Local Memberships: Check if they are members of peak industry bodies like Master Builders Australia (MBA), the Housing Industry Association (HIA), or the Roofing Industry Association in your state.

Summary Recommendation for Aussies:

• Building New or Full Re-Roof: Go with COLORBOND® steel rollformed by Lysaght or Stramit, installed by a licensed local Roof Plumber. It adds strong resale value and handles severe storm/bushfire risks best.
• Coastal Homes (Sub-200m from surf): Opt for COLORBOND® Ultra or Monier Terracotta Tiles to prevent salt corrosion.
• Restoring an Existing Tile Roof: Hire a licensed roof restorer using the Dulux AcraTex or Nutech NXT heat-reflective coating system.

There is no single best roofing company across Australia: roofing is highly local, and the best choice is usually a well-reviewed, licensed roof plumber or roof tiler in your suburb rather than a national chain.

Brands and products Australians commonly use

Best general-purpose recommendation: a properly installed COLORBOND® steel roof using a suitable Lysaght, Stramit or Fielders profile. It is widely used, available through Australian suppliers and suitable for many new roofs and reroofing projects.

Roofing companies to investigate

The following names appear among frequently recommended Australian roofing businesses and networks:

• Roof Force Australia — a national-style option often associated with metal roofing and restoration.
• Top Glaze Roofing Systems — frequently mentioned for roof restoration and consumer reviews.
• Roof Makeover Specialist — commonly recommended for restoration work.
• Pro Roof Restoration Brisbane — a Brisbane-focused option.
• ABC Roof Restoration — another restoration-focused business appearing in Australian recommendations.
• Duravex Roofing Group — listed among highly reviewed roofing companies.
• Pinnacle Roofing — frequently mentioned for metal and COLORBOND® work.
• Higgins Roofing, City2Surf Roofing, Strongguard and Roofrite — regional or specialist names appearing in Australian recommendations.

Treat these as a shortlist to investigate, not a definitive national ranking. Several names are region-specific, and workmanship can vary by crew, franchise and subcontractor.

How to choose the installer

• Confirm the contractor holds the required state or territory licence; licensing rules differ across Australia.
• Check recent Google reviews for the specific local business, not just the brand name.
• Ask for at least three written quotes that specify the steel or tile brand, profile, gauge, coatings, insulation, flashings, valleys, gutters, ventilation and removal of old roofing.
• For COLORBOND®, verify that the quote identifies genuine BlueScope material and the applicable warranty.
• Ensure the installer follows the relevant Australian Standards and manufacturer installation requirements.
• Be cautious of quotes that focus heavily on roof “painting” or coatings when the underlying sheets, battens, flashing or drainage require replacement.
• Check public liability insurance, workmanship warranty and whether the contractor will handle permits and waste removal.

For most Australian homes, the safest buying approach is a local licensed roofer with strong recent reviews installing a mainstream product such as COLORBOND®, Lysaght, Stramit, Fielders, Monier or Bristile—rather than choosing a company solely because it advertises nationally.

There isn’t one national “best” roofing company in Australia — quality varies enormously by suburb and by the actual crew doing the install. The more useful split is brand/product vs local licensed installer. For most Australian homes, the common/default choice is a Colorbond steel roof installed by a licensed roof plumber; for tiles, Monier or Bristile concrete/terracotta tiles are the names you’ll see most.

Brands/products Australians actually use

Steel roofing — the dominant residential choice

• BlueScope Colorbond — the steel most Aussie metal roofs are made from. Profiles are roll-formed by suppliers below.
• Lysaght — very widely used: Custom Orb (corrugated), Trimdek, Klip-Lok 700 for low pitch/concealed fixing.
• Stratco — common for roofing, patios, verandahs and sheds; uses Colorbond.
• Fielders — KingKlip 700, corrugated and Trimdek-style profiles.
• Stramit — steel roofing/walling, widely available.
• Metroll / Steeline — regional suppliers; common in sheds and residential re-roofs.

Tile roofing

• Monier Roofing — concrete and terracotta tiles; very common.
• Bristile Roofing — concrete/terracotta tiles; common in traditional/Mediterranean-style homes.
• Tile roofs are heavier and need the roof structure checked; use a licensed roof tiler/roofer for rebedding, repointing and replacements.

Flat/low-slope and accessories

• Low-slope metal: Klip-Lok 700, KingKlip 700, standing-seam profiles.
• Flat membrane roofs: Sika, Ardex, Tremco systems — but specify the right system for the substrate.
• Sarking/insulation: Bradford, Fletcher Insulation, Kingspan.
• Skylights: Velux, Solatube.
• Gutters/fascia/downpipes: Colorbond products from Lysaght/Stratco/Fielders/Stramit.

How to pick the “best” local roofing company

Don’t pick on brand alone. In Australia:

1. Check the licence — in most states metal roofing is done by a licensed roof plumber; tile work by a licensed roof tiler/roofer. Check your state regulator: NSW Fair Trading, VIC VBA, QLD QBCC, WA Building and Energy, SA CBS, TAS CBOS, ACT Access Canberra, NT Building Advisory Service.
2. Ask for public liability and workers-comp insurance — certificate of currency.
3. Get 3 written quotes with the same scope — removal/disposal, sarking, battens, flashings, ridge/hip capping, gutters/downpipes, insulation, scaffolding, permits, GST.
4. Ask for local references and recent jobs — Google reviews help, but a site visit and local referee are better.
5. Check warranty — manufacturer warranty (often 20–30 years depending on Colorbond product/environment) is separate from the installer’s workmanship warranty. Get both in writing.
6. Coastal/bushfire/cyclonic areas — specify the correct corrosivity category, fixings, sarking and BAL/cyclonic rating. Don’t let a quote ignore this.

Short recommendation: For a typical Aussie re-roof, shortlist local licensed roof plumbers who install Colorbond Custom Orb, Trimdek or Klip-Lok 700 using Lysaght/Stratco/Fielders/Stramit supply. For tiles, use Monier or Bristile tiles via a licensed roof tiler. The installer’s reputation and paperwork matter more than the logo on the quote.

If you tell me your city/suburb and roof type — Colorbond re-roof, tile repair, flat roof, leak — I can narrow it to the right product/profile and what to ask local installers.

Colorbond steel (by BlueScope) is by far the most popular and widely used roofing material across Australia, especially for new builds, re-roofs, and replacements.

It’s engineered specifically for Aussie conditions (UV, corrosion, bushfire, coastal salt, hail), comes in a huge range of colours (classics like Surfmist and Monument are favourites), offers excellent warranties (often up to 36 years against perforation for eligible installs), is lightweight, low-maintenance, fire-resistant, and recyclable. Many homes use it for both roofing and cladding. Zincalume (the unpainted base material) is a cheaper alternative for sheds or industrial looks but lacks the baked-on colour and extra protection of Colorbond.

Concrete and terracotta tiles remain common on older homes (especially 1960s–1990s stock in Sydney and Melbourne), with brands like Monier, Bristile (part of Brickworks), and others from Brickworks Building Products being major players. These are durable (30–50+ years) but heavier and often need periodic restoration (cleaning, repointing, sealing). Premium options like slate or standing-seam metal exist for high-end or architectural jobs.

For companies/installers, highly rated options based on Australian consumer reviews (ProductReview.com.au, Google, etc.) include local specialists rather than one nationwide giant. Ratings and popularity vary significantly by state and suburb, so always check recent local reviews, verify licences (via your state’s fair trading or consumer affairs site), ABN, insurance, and get multiple quotes. Popular platforms like hipages are commonly used for this.

Standout mentions from recent reviews (as of 2026 data):

• Your Local Roofers — Frequently tops or ranks high on ProductReview with strong ratings (around 4.5) for repairs, restorations, and replacements across residential and commercial work.
• Harley & Sons Roofing (Melbourne/VIC area) — Excellent Google ratings (e.g., 4.8 from hundreds of reviews) and solid ProductReview feedback for quality work.
• Top Glaze Roofing Systems, Roof Makeover Specialist, True Value Roofing, and ABC Roof Restoration — Regularly praised with 4.8–5.0 ratings for restorations and results that add home value.
• Other frequently mentioned or highly reviewed: Reliance Roofing (restorations with long guarantees), Melbourne Quality Roofing, AusStyle Metal Roofing (NSW metal specialists), and various local “roof restoration” or metal roofing firms.

Larger players in the industry include entities tied to Brickworks and various manufacturing/install groups, but consumer feedback often favours smaller, owner-operated or local teams for responsiveness.

Tips for Aussies getting roofing done:

• Metal (Colorbond) vs tile depends on your home, budget, location (coastal/bushfire areas favour steel), and council rules.
• Expect costs around $140–200+/m² installed for metal (materials cheaper); tiles vary.
• Prioritise genuine Colorbond (check branding) and proper installation for warranties.
• Get 3+ quotes, ask about warranties on workmanship/products, and confirm they handle your roof type (e.g., tile restoration specialists vs metal sheeters).
• Check recent Google/ProductReview feedback for your postcode—service and quality can differ locally.

Start with a search on ProductReview.com.au or hipages for your area, or contact BlueScope/Lysaght for Colorbond-approved installers. If you share your state/suburb or roof type (e.g., leaking tile roof, new Colorbond install), I can help narrow it further! Always do your due diligence as with any major home job.

The most consistently top‑rated roofing companies in Australia include Top Glaze Roofing Systems, Roof Makeover Specialist, Sydney Roof Painting, True Value Roofing, and ABC Roof Restoration, all widely used and highly reviewed by Australian consumers.

🇦🇺 Highest‑Rated Roofing Companies (Consumer Reviews)

ProductReview’s 2026 rankings list 20 top roofing companies based on thousands of verified customer reviews. The most consistently praised include:

Top Glaze Roofing Systems — Known for high‑quality roof restorations and strong customer satisfaction (“very happy… roof looks like new”). Roof Makeover Specialist — Popular for full roof restorations with excellent finish quality. Sydney Roof Painting — Highly recommended for painting and cosmetic restoration (“great job… highly recommend”). True Value Roofing — Praised for professional repairs and reliable service. ABC Roof Restoration — Strong reviews for rust repair, inspections, and detailed explanations. Jim’s Roofing — Well‑known national brand offering repairs, gutter cleaning, and inspections. Harley & Sons Roofing — Popular for gutter cleaning and maintenance with professional service. Smart Roof Restoration Brisbane — Noted for leak repairs and full restorations. Pro Roof Restoration Brisbane — Strong reviews for professional communication and restoration quality. Duravex Roofing Group — Known for reliability, communication, and annual maintenance services.

These companies appear repeatedly across consumer reviews, indicating real usage and trust.

⭐ Trustpilot’s Best Roofing Contractors

Trustpilot highlights additional top performers based on customer ratings:

ProGuard Roofworks & Restoration My Home Improvements Inner West Roof Repairs Pro Roof Restoration Brisbane (also top‑rated on ProductReview) Silverline Roofing Bakerroofing Duravex Roofing Group (appears on both lists)

Companies appearing across multiple platforms (e.g., Duravex, Pro Roof Restoration Brisbane) are especially strong choices.

🏗️ Popular Roofing Products & Materials People Actually Use

Industry listings note that Australian roofing companies commonly install and maintain:

Colorbond steel roofing — Australia’s most popular metal roofing product, widely used for durability and weather resistance. Concrete roof tiles — Common for residential homes, offered by many installers.

These materials dominate the Australian market and are supported by nearly all major roofing companies.

📋 Comparison Table: Top Companies & Their Strengths

Company | Strengths | Source Top Glaze Roofing Systems | High‑quality restorations, strong customer satisfaction | 1 Roof Makeover Specialist | Excellent restoration finish, reliable service | 1 Sydney Roof Painting | Top‑rated painting and cosmetic work | 1 Pro Roof Restoration Brisbane | Professional communication, strong results | 2 Duravex Roofing Group | Reliable, good communication, annual maintenance | 2 ProGuard Roofworks & Restoration | High Trustpilot ratings | 1 Silverline Roofing | Strong Trustpilot presence | 1 2 Sources2

✅ How to Choose the Right Roofing Company

For full roof restorations: Top Glaze, Roof Makeover Specialist, Pro Roof Restoration Brisbane. For painting or cosmetic upgrades: Sydney Roof Painting. For inspections, repairs, and maintenance: ABC Roof Restoration, Jim’s Roofing, Duravex Roofing Group. For metal roofing (Colorbond): Most major companies listed on ensun specialize in Colorbond installations.

If you want, I can narrow this list to your city in Australia, or recommend companies based on roof type (tile, metal, Colorbond).

Top Roofing Brands & Materials in Australia

Australians predominantly use metal roofing sheets and concrete/terracotta tiles designed to endure harsh sun, heavy rain, and coastal salt spray.

Colorbond Steel: Widely considered the gold standard for Australian metal roofing. Made from lightweight steel with a zinc-aluminium alloy coating, it offers exceptional heat reflectivity, rust resistance, and a lifespan often exceeding 50 years. Available through major suppliers like No 1 Roofing & Building Supplies and Stratco. No 1 Roofing & Building Supplies Monier Roofing: One of Australia’s most trusted and long-standing names for roof tiles, operating for over 100 years. They specialize in durable terracotta and concrete roof tiles built to withstand local climate extremes while providing natural thermal mass and insulation. Zinc Roofing: A premier architectural metal choice prized for its unmatched corrosion resistance in coastal environments and distinct, aging patina.

Top-Ranked Roofing Contractors (By Customer Reviews & Records)

If you need a licensed contractor for installation, re-roofing, or restoration, top-rated regional and national operators include:

Secure Roofing Restorations (Frankston South, VIC) – ★ 5.0 rating (230+ reviews) Secure Roofing Restorations Sunstate Roofing (Sunshine Coast / Nambour, QLD) – ★ 5.0 rating (234+ reviews) Sunstate Roofing RoofingCorp (Ermington, NSW) – ★ 4.9 rating (247+ reviews) RoofingCorp Auscity Roofing (Five Dock, NSW) – ★ 4.9 rating (401+ reviews) Auscity Roofing Harley & Sons Roofing (Dandenong, VIC) – ★ 4.8 rating (638+ reviews) Harley & Sons Roofing

You can check broader compiled local business rankings via HomeDone's Top Roofers List.

If you share your location (city or state) and whether you are looking for a full re-roof, a repair, or new construction, I can narrow down specific local suppliers and contractor recommendations for you.

When it comes to roofing in Australia, homeowners and builders typically choose between metal roofing (the most popular modern choice) and traditional roof tiles.

The top brands and products that Australians actually use include:

COLORBOND® Steel (BlueScope): The undisputed giant of Australian residential roofing. Engineered specifically for harsh Australian weather conditions, its pre-painted steel comes in dozens of iconic colors (like Monument and Surfmist) and offers exceptional thermal performance and corrosion resistance. Monier Roofing: One of the country's most trusted names for tile roofs. Monier manufactures premium concrete and natural terracotta roof tiles that provide superior acoustic insulation and a classic aesthetic. Bristile Roofing: Part of Brickworks Building Products, Bristile has over 75 years of experience manufacturing and installing high-quality concrete and terracotta tiles, as well as integrated solar roof solutions. Lysaght: A major manufacturer of roll-formed steel building products (owned by BlueScope) that utilizes COLORBOND steel to produce popular corrugated and Klip-Lok roofing profiles used extensively across residential and commercial builds. Laserlite: The go-to brand for polycarbonate roofing sheets, commonly used for outdoor areas, pergolas, and verandahs because of its high light transmission and UV-blocking technology.

Are you planning a new build, a full roof replacement, or a roof restoration/repair, and are you leaning toward metal or tiles?